2026-06-01 06:44:15 <mps> algitbot: retry master
2026-06-01 07:21:24 <mps> algitbot: retry master
2026-06-01 07:27:52 <ikke> mps: ftr, I stopped the edge and 3.23 builders for riscv. The 3.24 builder has priority
2026-06-01 07:30:08 <mps> ikke: aha, ok. thanks for info
2026-06-03 07:28:06 <mps> algitbot: retry 3.20-stable
2026-06-03 09:37:38 <ncopa> ikke: I am considering move build-3-23-riscv64 or build-edge-riscv64 to the p550 box
2026-06-03 09:37:43 <ncopa> not sure which makes most sense
2026-06-03 09:40:15 <ikke> Maybe start with edge?
2026-06-03 09:57:47 <ncopa> copying edge now
2026-06-04 09:47:40 <mps> is anyone ready/want to test u-boot for spacemit K1 with mainline opensbi before push it to builders
2026-06-04 09:47:57 <mps> i can upload it somewhere
2026-06-05 07:21:50 <ncopa> that is bananapi bpi-f3, right? is it orangepi rv2 as well?
2026-06-05 07:22:04 <ncopa> i can test it on a orangepi rv2
2026-06-05 07:22:16 <ncopa> (if I can allocate time)
2026-06-05 07:24:27 <mps> yes, bpi-f3, musebook and friend tested it on orangepi rv2 last night
2026-06-05 07:25:07 <ncopa> very nice
2026-06-05 07:25:12 <ncopa> what kernel do you use?
2026-06-05 07:25:25 <mps> it should work on milk-v jupiter and musepi-pro
2026-06-05 07:27:12 <mps> i tested with our bianbu (linux-spacemit pkg), 6.18.34 from jmontleon and linux-7.1-rc series
2026-06-05 07:28:18 <ncopa> what is the status of 7.1-rc?
2026-06-05 07:28:32 <ncopa> i mean how well does it work?
2026-06-05 07:30:11 <ncopa> i dont have much faith in jmontleon kernels
2026-06-05 07:30:31 <mps> on bpi-f3 important things work except wifi rtl8852bs
2026-06-05 07:32:26 <mps> i didn't picked all existing patches, think to do this when 7.1 stable released
2026-06-05 07:33:10 <ncopa> what i mainly need is ethernet, SD card, NVMe
2026-06-05 07:33:23 <mps> devoted some time for next alpine stable
2026-06-05 07:33:41 <mps> this three works
2026-06-05 07:33:52 <ncopa> mps: do you have any hifive premiere p550 machines?
2026-06-05 07:34:00 <mps> no
2026-06-05 07:34:05 <ncopa> bummer
2026-06-05 07:36:05 <ncopa> oh they actually ahve the 32G model for sale
2026-06-05 07:36:25 <mps> i have musebook K1 with nvme, 16GB RAM which I plan to use with 7.1 kernel as development machine for riscv64
2026-06-05 07:37:09 <mps> for now i  don't plan to order K3 machine
2026-06-05 07:42:38 <mps> i will ask friend later to it more on orangepi rv2, if he found time ofc
2026-06-05 07:49:44 <ncopa> if you have the kernel i can test here
2026-06-05 07:53:41 <mps> ok, will upload aport changes later when finish some $day_works
2026-06-05 11:53:54 <mps> ncopa: https://dev.alpinelinux.org/~mps/riscv64/linux-rc/ aport for linux-rc 7.1 for spacemit
2026-06-05 11:54:35 <ncopa> nice!
2026-06-05 11:56:03 <mps> patch to current testing/u-boot-spacemit pkg in alpine https://dev.alpinelinux.org/~mps/riscv64/0001-testing-u-boot-spacemit-build-with-mainline-opensbi.patch
2026-06-05 11:58:21 <mps> and u-boot-spacemit pkg https://dev.alpinelinux.org/~mps/riscv64/u-boot-spacemit-2022.10.2.2.9-r1.apk
2026-06-05 12:00:19 <mps> and https://dev.alpinelinux.org/~mps/riscv64/linux-rc-7.1-rc5-r0.apk kernel
2026-06-05 12:01:51 <mps> if you need help don't hesitate to ask, i will be around to answer what i can
2026-06-05 12:03:10 <mps> later today/evening i will prepare new mmc bootable image for friend to test and i can post make script for it
2026-06-05 12:04:26 <mps> note: i'm writting here if someone else want to test all these and report bug or help to improve things
2026-06-05 18:17:27 <mps> i uploaded right now mmc image for testing u-boot on orangepi rv2 https://dev.alpinelinux.org/~mps/riscv64/spacemit-rv2.img.xz
2026-06-05 20:19:50 <mps> algitbot: retry master
2026-06-08 07:59:02 <mps> I bricked my bpi-f3 yesterday by writing wrong value to eeprom
2026-06-08 08:05:34 <ncopa> aw! aim sorry
2026-06-08 08:08:08 <mps> will try to recover with titanflasher. wish me luck
2026-06-08 08:09:10 <mps> titanflasher require glibc >:
2026-06-08 08:09:25 <ncopa> maybe with gcompat?
2026-06-08 08:13:16 <mps> tried earlier with gcompat but didn't worked. i think i have devuan installation archived somewhere
2026-06-08 08:14:33 <mps> if can't find installation doesn't take too long (ofc, if we not comparing with alpine :) )
2026-06-08 08:15:51 <mps> fine, found devuan archive
2026-06-08 08:16:24 <mps> and it boots \o/
2026-06-08 08:17:26 <mps> it is/was good idea to not erase this usb disk
2026-06-08 08:19:40 <ncopa> \o/ congrats!
2026-06-08 08:36:45 <mps> success \o/
2026-06-08 08:38:10 <mps> so in case of scrambled/erased eeprom bpi-f3 and probably other K1 board can be recovered by titanflasher.
2026-06-08 08:38:26 <mps> good to remember
2026-06-08 08:39:13 <ncopa> very nice
2026-06-08 08:40:30 <mps> now can test linux 7.1-rc7
2026-06-09 06:48:31 <mps> mariadb test blocks riscv edge
2026-06-09 07:13:13 <ikke> Yes, I mentioned it to ncopa. I don't have access to the builder atm
2026-06-09 07:24:14 <ncopa> I will have a look after breakfast
2026-06-09 07:34:26 <ikke> Enjoy breakfast
2026-06-09 07:39:16 <mps> bon apetit
2026-06-09 13:05:39 <mps> ncopa: iiuc you have opi-rv2, what wifi driver need to be enabled for it and what firmware pkg it need
2026-06-12 11:12:26 <mps> kernel 7.1-rc7 for k1 spacemit https://dev.alpinelinux.org/~mps/riscv64/linux-rc-7.1-rc7-r0.apk
2026-06-12 11:13:34 <mps> `cpufetch` says https://tpaste.us/pBnk
2026-06-12 11:14:16 <mps> tested on my somewhat broken bpi-f3
2026-06-12 11:15:11 <mps> next week it will be (hm) stable release
2026-06-12 20:22:13 <mps> finally solved opensbi and mainline linux 7.1-rc misaligned vector problem
2026-06-19 07:37:44 <mps> anyone upgraded small server/router to 3.24-stable?
2026-06-19 07:38:55 <mps> in my case apk want to add a lot of graphic packages, practically making desktop
2026-06-19 07:44:34 <mps> is it possible to test/check what package wants to pull all this
2026-06-19 07:45:31 <mps> `apk info -r mesa` for example if mesa not installed
2026-06-22 18:39:41 <mps> new stable opensbi 1.9 will be released at the end of this month. it have enhancement and fixes for spacemit K1 and K3 (and other)
2026-06-22 18:41:01 <mps> I think to build u-boot-spacemit pkg with it and push to aports, instead of vendor opensbi
2026-06-22 18:42:13 <mps> already tested (and still testing) on K1, for now works fine
2026-06-29 11:22:44 <mps> linux 7.2-rc1 boots on bpi-f3 and musebook without patches
2026-06-29 15:35:19 <ncopa> awesome!
2026-06-29 15:36:11 <ncopa> i ordered another milk-v jupiter 2. they showed 1 in stock so immediately grabbed it.
2026-06-29 15:36:24 <ncopa> lets see if they can deliver
2026-06-29 15:36:29 <ikke> Let's hope so
2026-06-30 06:34:15 <ncopa> spacemit reached out and want to help contact reseller so we can purchase k3 machine
2026-06-30 06:35:04 <ikke> ❤️
2026-06-30 06:37:59 <ncopa> the server blade with 10 x spacemit k3 boards went up in price over the weekend. significantly.
2026-06-30 06:38:07 <ncopa> https://www.aliexpress.com/item/1005012351249711.html
2026-06-30 06:38:14 <ncopa> crazy
2026-06-30 07:36:51 <mps> uh, too much
2026-06-30 09:14:56 <ncopa> there are rumors that the milk-v titan will ship early July. Lets see if I get the one I ordered in December
2026-06-30 09:35:34 <ikke> Hopefully it doesn't remain a rumor 
2026-06-30 09:39:38 <ncopa> yeah. Spacemit contacted me and wants to help us get k3 machine.
2026-06-30 10:18:38 <mps> \o/
2026-06-30 20:37:45 <iggy> it's still "cheap" on Firefly's store. The 32G version is _only_ 57k (vs 104k on aliexpress)